Press table Tanger
Table for the press areas. The set is made up of a steel structure to which is added a fixed frontal wooden board and a wooden worktop with two holes for cable glands. If required, the table can have two closing side panels. The table can be used for 2 or 3 seats depending on the seating requirements.
Dimensions (for 3 places):
- Table length: 1812 mm
- Table depth :607 mm
- Table height: 816 mm
- Height from the floor to the worktop: 719 mm
The press table Tanger is made to order, so these measurements can be customised for each project.
Fixed to the step with 4 anchorage points.
Materials:
Structure made entirely of steel, with qualities. Galvanised treatment.
Panels made of high-density wood suitable for indoor and outdoor installations. Wood thickness 12 mm.
Tests and Certifications:
Corrosion resistance.
Protection by cataphoresis and painting for metal parts. Absence of oxidation points of the base metal in a 500-hour salt spray chamber test (UNE EN ISO 9227)
